Vaddio Quick-Connect USB Instrukcja Użytkownika Pobierz pdf (Strona 7)

Quick-Connect USB Interface

Quick-Connect USB, Document Number 342-0653 Rev. B Page 7 of 36

Quick-Connect USB Interface

Image: Rear Panel with Feature Call-outs

1) Power Input: 5.5mm OD x 2.5mm ID coaxial connector for the provided 24 VDC, 2.0 Amp switching power supply. The

Quick-Connect USB Supplies Power to the attached camera.

2) 5-Position Dip Switch: A 5-position dip switch allows the user to choose the HD video color space (YCbCr for HDMI and

sRGB color space for DVI-D) on the HDMI output, configure for updates, and restore factory defaults when cycling power.

Table: Quick Connect USB Rear Panel Dip Switch Settings

3) RS-232 IN: Serial RS-232 input on a RJ-45 connector. This control port allows a Vaddio joystick controller or 3

party

controller (Crestron/AMX) to control the camera functions if the embedded webserver is not used for real time control.

4) RS-232 OUT TO CAMERA: Serial RS-232 output on RJ-45 connects via Cat-5 to the camera RS-232 input on the

camera. Control signals from the embedded webserver are sent via RS-232, or RS-232 from external controllers is

relayed to the camera over this control port.

5) EZ POWER VIDEO: RJ-45 jack used to supply 24 VDC power to the camera and return differential video from the camera

on Cat-5 cable at a maximum distance of 100’ (30.48m) with PTZ cameras and up to 150’ (45.7m) with stationary POV

cameras (i.e. ZoomSHOT and WideSHOT).

6) YPbPr Output: Analog component video output on a DE-15 (HD15) connector (resolution is set on the back of the

camera). The YPbPr output resolution will be the same as the HDMI output resolution. SD video resolutions (Y/C and

CVBS formats) are not supported by the Quick-Connect USB Interface; however some progressive frame analog

component SD video is supported.

7) HDMI Output: The digital video output on the HDMI connector can either be YCbCr color space (normal HDMI mode) or

can be changed to DVI-D color space (sRGB) for older monitors and devices. The HDMI and YPbPr outputs work

simultaneously and are the same resolution (set at the camera).

8) Ethernet 10/100 Network RJ-45 Jack: The Ethernet jack will have yellow and green lights to indicate connectivity and

activity of the network on that jack. The Ethernet jack will stream video (up to 1080p/30 H.264 and can be set from the

internal web pages much like the HD-USB Camera. The resolutions will available in a three (3) stage quality format (High

Quality, Good Quality and Standard Quality targets) and includes a range of CIF to 1080p/30.

9) USB 2.0 Connector: The USB 2.0 is on a Type-B female jack and connects to a PC running a soft-client video

conferencing system or video capture software that uses UVC (USB Video Class) standard drivers. No other USB 2.0

drivers are required to plug the QC-USB into a computer and have it work. The UVC drivers will auto negotiate the top

resolution that the PC and QC-USB can accomplish together and auto-implement.

Dip Switch Function Default Activation

Future Use Up n/a

Color Space HDMI Connector Up = HDMI (YCbCr) Down = DVI (sRGB)

Program/ Update UP = No Program DOWN = Ready To Program

Future Use Up n/a

All Down

Reset to Defaults All UP ALL DOWN (with power cycle)

①

②

④

③

⑥

⑤

⑦

⑨

⑧

1 2 3 4 5 6 7 8 9 10 11 12 ... 35 36

Komentarze do niniejszej Instrukcji

Brak uwag

Vaddio Quick-Connect USB Instrukcja Użytkownika Strona 7

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Vaddio Quick-Connect USB